Complying with NYC Sections 28-100 through 28-109 Ordinance for noise mitigation for construction si

There are now new laws enacted in the State ofSection 28-108 Temporary or portable noise barriers
New York requiring that all construction that is takingYou can find the complete ordinance by going to
place in the City must provide some sort of noisewhere you can procure a copy of this ordinance in its
abatement for construction equipment that can beentirety.
heard by the receptor (the general public in the City).If a Construction fence is utilized, it can be lined with
This Ordinance section 28-101 through Section 28-108the 2 LB American mass loaded vinyl from and will
and has been revised for the year 2008. The lawmeet the city's requirement for a 30 STC noise barrier
requires that every construction site in the city bethat blocks the line of sight to the receptor. The
equipped with noise blocking or noise abatementconstruction fence cannot extent in height above 15
material. Whether it is a soundproof fence structure orfeet and must block the line of sight from the receptor.
concrete barriers or a sound-mitigating curtain. NoThe 2LB American mass loaded vinyl is perfect for
matter what type of barrier is used it must meet anlining the inside of such a fence structure and meets all
STC (Sound Transmission Class) of 30 or better.of the State and city requirements for such a fence
Section 28-100 Provides the general requirements forincluding providing a 32 STC for the fence structure.
compliance of the NYC Noise Mitigation Ordinance.These barriers can be either permanent or temporary,
Section 28-101 Required Noise Mitigation measures forbut either way the American mass loaded vinyl can be
General Construction.re-used to meet the noise mitigation regulations in other
Section 28-102 Describes various construction devicesareas of the City.
and activities (Impact equipment, Pile Drivers JackIf a chain link fence were utilized, then the 2LB
Hammers etc)American mass loaded vinyl would be wired to the
Section 28-103 Breakdown of Authorized hours wherefence using baling wire or aircraft safety wire and a
in construction can take placepair of safety wire pliers. The mass loaded vinyl or
Section 28-104 Alternative Noise Mitigation PlanMLV for short is a very stout and dense material but it
Section 28-105 Utility Noise Mitigation Plancan be drilled or punctured to allow for the wire
Section 28-106 Required Noise Mitigation Plan forfasteners to be used. It is recommended that all holed
Utilitiesmade in the MLV be caulked with an acoustical caulk
Section 28-107 Perimeter Noise Barrierssuch as the OSI-175 SC sound caulk.