Multiple Location Air Conditioner

If you are considering an upgrade to your airrefrigerant. The hot side unit has a fan assembly to aid
conditioning, you are going to have to choose ain the removal of heat from the condenser coils. It also
system. Here we cover a unit that is actuallyhas its own control logic.
separated into two locations.Split air conditioners are used in homes as well as
A dual or separated air conditioner is one where thebusiness buildings. Many office buildings and retail
two main components of the unit are split betweenestablishments use split types due to the larger size of
two physical locations. Although the initial installationthe condenser units. The larger size condensers can
cost is generally higher for a split type air conditioner,be located more easily outdoors behind the buildings, or
they tend to be more energy efficient in the long run.in some cases, on the roofs of the buildings. Very large
This savings is energy will quickly recoup the installationbuildings and most multi-story buildings have problems
cost. There is a big noise reduction as the compressorusing split systems due to the distance between the
is located in the outside unit. These air conditioners areunits. Duct work becomes unmanageable at such
suggested for use in places where there is a spacedistance and results in too much inefficiency. Water
problem.chiller units are generally more appropriate for these
The air handling unit is on the inside. This consists oftypes of structures.
the evaporator section and the duct work thatAnother type of split system is known as the mini split
circulates and delivers the air. The fan motor is alsosystem air conditioner. Since an estimated 30% of
located inside along with the filters. The evaporator coilenergy consumption results from duct work loss of
is located inside also. The evaporator coil is where thecooling, the mini split system eliminates duct work. It
refrigerant actually vaporizes and the heat adsorptionoperates more like a window unit except that it is
takes place. The thermostat which controls theconnected to an outside condenser by means of a
system is located indoors also, of course, but usually atconduit. The conduit requires only a 3 inch hole in the
a more central location where a temperaturewall to connect the units. The conduit contains the
measurement can be more effectively made.power cable, refrigerant tubing, suction tubing, and a
Search Engine Marketing Specialistcondensate drain. These systems are popular
Since 1995 SEO/SEM tools, training, and professionalbecause of their small size and flexibility. They can be
"full service" Search Engine Marketing help at veryfloor units, some of which are mounted on casters and
affordable rates.can be moved to where they are most needed. They
The divided unit is often referred to as having a coldcan also be mounted on the walls or ceilings. As many
side and a hot side. The cold side is the indoor unitas four individual units can also be connected to a
where cooling actually takes place. The hot side is thesingle outdoor unit.
outdoor unit where heat is given up from the